280ml Toilet Wall Sealant Caulking Agent Gap Repair Tool Waterproof Anti-mold

New 280ml Epoxy Grout, Beautiful Waterproof Floor Sealant, Anti-Mold Filler, True for Wall Porcelain

Summary:

With a smooth surface, it contains water and resin. It can be used to clean ceramic tiles, preventing them from blackening and molding.

Instructions:

1. First, clean the dirt in the gap between the tiles. The gap depth is best suited for 2-3mm. It is recommended that the gap is too large, then use tile renovation.

2. Tile the tile upside down and shake for about 20 seconds. Tear off the sealed aluminum foil, unscrew the cap, point the nozzle vertically away from the tiles, and squeeze the evenly along the gap. Then, squeeze the out and tear it off after scraping the .

3. Use a small scraper (or a quilting ball) to lightly scrape back and forth a few times so that the tile deformation penetrates evenly into the gap. It is recommended to apply more times to fill the gap as much as possible.

4. After scraping, remove the excess and allow it to dry naturally. It is recommended to dry for 2-3 days. It should not be touched during this period.

5. For large or deep gaps, it can be applied several times every other day.

Precautions:

1. Please test it in a small area before use and use it normally after no adverse reactions occur.

2. Depending on the usage environment, it takes approximately 2-3 hours for the tile renovation to solidify.

3. Once the tile deformation has hardened, avoid washing it with water, especially hot water.

4. It can still be used multiple times after opening, but remember to seal it to avoid direct sunlight.

5. It should not be used when frozen, and avoid contact with children.

6. Do not accidentally rub your eyes. Rinse immediately with water and consult a doctor.

7. If it is not used up after opening, the needle cap should be rinsed with water before inserting it to avoid blocking the needle mouth and deforming the remaining tiles and affecting the next use.

8. The low temperature in winter may cause the tiles to become sticky. It is recommended to soak them in warm water before use.

9. Suitable for storage and transportation temperatures between -5°C and 50°C. Outdoor air temperatures below minus 10°C are not recommended for purchase and use. If the temperature is too low, it will affect the tile renovation process.

Specifications:

Material: Dacron

Model Number: Epoxy Tile Grout

Use: Epoxy Tile Grout

Use for: Wall Sealant

Size: 6 x 16cm/2.36 x 6.30in

Net Content: 280ml

Material: Water, Resin, Aluminum Oxalate

Weight: 340g

Drying Time: 1h

Packing List: 1 x Tile Repair Agent, Wall Sealant 280ml